3M standard nylon cable ties product family

3M™ Standard Nylon Cable Ties

Options available
3M™ Cold Shrink QT-III Outdoor Terminations offer easy installation and reliable performance when terminating indoor and outdoor medium voltage cable. The Hi-K stress control design delivers excellent BIL performance and lower surface stress, resulting in a more compact termination. The 3M™ Cold Shrink QT-III Outdoor 2 Skirt Termination7620-S-2 has a conductor size range for 5 kV: 8-4 AWG and 8 kV: 8-6 AWG.

3M™ Cold Shrink QT-III Termination Kit 7620-S, 7680-S & 7690-S Series

Options available
3M™ Cold Shrink QT-III Silicone Rubber Termination, 7642-S-2

3M™ Cold Shrink QT-III Termination Kit 7640-S, 7650-S & 7660-S Series

Options available
3M C/S QT-III Slcn RTK, 7620-T-95,5-8kV, 8.1-15mm c/i OD, 3t/kts

3M™ Cold Shrink QT-III Termination Kit 7620-T & 7690-T Series for 5-35 kV

Options available
CONNECTOR, SC0001 STEM *

3M™ SC Stem Connectors

Options available
3M Cold Shrink Connector Insulators 8420 and 8430 Series

3M™ Cold Shrink Connector Insulators 8420 and 8430 Series

Options available
Cold Shrink QS-III Splice Kit

3M™ Cold Shrink QS-III Inline Shielded Cable Splice Kits 5513A, 5514A, 5515A and 5516A Series

Options available
Scotchcode STD-0-9 dispenser

3M™ ScotchCode™ Wire Marker Tape Dispenser STD

Options available
CC2 Cable Preparation Kit

3M™ Cable Preparation Kits

Options available
KIT, 7642-T-110

3M™ Cold Shrink QT-III Termination Kit 7620-T & 7690-T Series for 5-35 kV

Options available
Performance Plus Connectors

3M™ Performance Plus™ Wire Connector Kits

3M Stock

B40006345

3M™ Scotchlok™ Copper Two Hole Long Barrel Lug 31172 has a 1/2 inch stud size, a 1.031 inch (26.2 mm) I.D., and a 7.000 inch (177.8 mm) length.

3M™ Scotchlok™ Copper Two Hole Long Barrel Lug 31100 Series

3M Stock

B00014735

3M™ Scotchlok™ Electrical IDC 558 electrically connects a (tap) wire end to a through (run) wire and insulates the connection. It is flame retardant and features a maximum insulation O.D. diameter of 0.120 inches (3.05 mm), and an operating temperature of 221°F (105°C). It is designed for control circuit wiring, fixture wiring, appliance wiring, signal and PA systems or automotive/boat/RV wiring. The suggested application tool for the 3M™ Scotchlok™ Electrical IDC 558 is the 3M™ Scotchlok™ Crimping Tool E-9BM.

3M™ Scotchlok™ Electrical Idc 558-Pouch, Run and Tap, Flame Retardant, Red, 22-16 Awg, 100/Pouch, 1000/Case

3M Stock

7100166926

3C_Phase_Rejacketing.tif

3M™ Rejacketing Sleeve RJS-6, 10 ft coil

3M Stock

7100164957