3M™ Cushion-Mount™ Plus Plate Mounting Tape E1920HS, Pink, 18 in x 25 yd, 20 mil, 1 roll per case

• Air release feature helps eliminate air bubbles under plates
• Plate side adhesive technology is designed to resist edge lifting on flexographic print plates
• Light medium density foam is ideal for combinations of solids and process with halftone dots
• Pink foam color indicates the light medium density foam
• Securely bonds flexographic photopolymer plates to urethane sleeves to prevent plate edge lifting
• Has higher plate side adhesion for challenging print conditions using thick plates or small print sleeves
• For use on urethane sleeves
• Cross-hatch pattern from the release liner creates grooves in the adhesive to release air

Our 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1920HS with easy mount adhesive is designed for mounting flexographic print plates to urethane sleeves. This pink 0.020 inch (0.51 mm) double coated foam mounting tape provides high quality light medium combination print.

The 3M™ Cushion-Mount Plus Plate Mounting Tape E1920HS provides high quality light-medium combination print. The adhesives remove cleanly from the print plate and the print cylinder. This 0.020 inch (0.51 mm) pink, double coated foam tape has the air release feature with high plate side adhesion and it has higher cylinder side adhesion to stick to sleeves.

Suggested Applications

• Mounting of plates for flexographic printing