3M™ Cushion-Mount™ Plus Plate Mounting Tape L1920S, Pink, 18 in x 25 yd, 20 mil, 1 roll per case

• 0.020 inch (0.51 mm) double coated light medium density pink foam tape
• Designed to be easily removed from ink contaminated print plates
• Ideal for printing combinations of solids and process with halftone dots
• Securely bonds the flexographic photopolymer plate to the urethane sleeve to prevent plate edge lifting during printing
• Air release feature allows air to escape from between the tape and cylinder/sleeve and between tape and plate
• For use on urethane sleeves
• Grooves in the adhesive are created by a cross-hatch pattern from the release liner
• Plate easily demounts from the double coated cushioned tape without adhesive residue

3M™ Cushion-Mount™ Plus Plate Mounting Tape L1920S with easy mount adhesive is designed for mounting flexographic print plates to urethane sleeves. This pink foam plate mounting sticky back foam tape provides light medium combination print.

Mount your photopolimer plate to urathane sleeves with 3M™ Cushion-Mount™ Plus Plate Mounting Tape L1920S. Our 0.51 mm pink, double coated foam tape has the air release feature. It is tolerant to ink contaminates allowing for easy and clean plate removal, and used for process/halftone images.

Suggested Applications

• This cushion tape is manufactured for 60 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve/cylinder) side is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removal when demounting.