1. Jamaica
  2. All 3M Products
  3. Tapes
  4. Flexographic Plate Mounting Tapes
  5. 3M™ Thin Flexographic Plate Mounting Tape E2105, Translucent, 18 in x 36 yd, 5 mil, 1 roll per case

3M™ Thin Flexographic Plate Mounting Tape E2105, Translucent, 18 in x 36 yd, 5 mil, 1 roll per case

3M ID 70006743911
  • 0.005 inch (0.13 mm) double coated tape has the air release feature designed to allow air to escape from between the tape and the plate
  • Non-linered side of the tape is designed for mounting to compressible sleeves
  • Securely bonds the flexographic photopolymer plate to the compressible sleeve to prevent plate edge lifting during printing
  • Clean removal from both the plate and the sleeve
 More...
View all details
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Backing Material
Polyester Film
Brand
3M™
Industries
Print
Overall Length (Metric)
32.91 m
Overall Width (Metric)
457.2 mm
Primary Liner
Polycoated Kraft Paper
Product Color
Transparent
Product Form
Roll
Details
  • 0.005 inch (0.13 mm) double coated tape has the air release feature designed to allow air to escape from between the tape and the plate
  • Non-linered side of the tape is designed for mounting to compressible sleeves
  • Securely bonds the flexographic photopolymer plate to the compressible sleeve to prevent plate edge lifting during printing
  • Clean removal from both the plate and the sleeve

3M™ Thin Flexographic Plate Mounting Tape E2105 is a double coated film tape constructed of a polyester film carrier with differential adhesives. It is specifically designed for mounting flexographic print plates to cushioned or compressible sleeves.

Mount Flexographic Plates with Confidence 3M™ Thin Flexographic Plate Mounting Tape E2105 is a double coated tape that has the air release feature designed to allow air to escape from between the tape and the plate. This crosshatched pattern creates a continuous and permanent network of micro-channels, allowing air to escape from between the tape and plate. It features excellent holding power on-press with easy and clean plate removal when demounting. In addition, it removes cleanly from the cushioned sleeve surface. Recommended Applications Mounting flexographic print plates to cushioned sleeves or compressible sleeves Keep the Presses Running and your Customers Coming Back For decades, our products have been at work in paper mills and printing plants helping to improve the quality of the work that goes out and the efficient of how it gets done. From paper web splicing to plate mounting and packaging the finished job, you can rely on us for solutions and service throughout your operation.

Suggested Applications

  • Mounting of plates for flexographic printing
Resources