3M™ Cold Shrink QT-III Termination Kit 7625-T-110, Tape/Wire/UniShield® Shielding, 5-15 kV, 3/kit, Indoor
- 3M ID 7000006103
Details
Highlights
- RELIABLE PERFORMANCE: Provides a void-free seal to the tape shield, wire shield, and UniShield® power cables
- SPECIFICALLY FORMULATED: Made with high dielectric-constant material that helps control the electrical field stress distribution
- ENGINEERED TO LAST: Built tough with non-tracking, molded, silicone rubber insulation
- INTENDED USE: Ideal for indoor and outdoor weather-protected applications
- EASY INSTALLATION: Conforms in restricted environments where space is limited
- SPECIFICATIONS: Meets or exceeds IEEE Standard 48, Class 1 requirements for 5, 8, 15, 25/28, and 35 kV terminations
- KIT CONTENTS: Items vary between kits — for detailed kit contents please refer to the product catalog
3M™ Cold Shrink QT-III Termination Kit 7620-T & 7690-T Series help provide a high-performance and void-free seal for the tape shield, wire shield, and UniShield® power cables. The kits are estimated to meet or exceed the lifetime of the cable and feature a high dielectric constant material that helps control the electric field stress distribution. For indoor and outdoor weather-protected applications, they help minimize installation time as no torches or other heating sources are needed. Additionally, they are simple to install even in confined work areas and meet or exceed IEEE Standard 48, Class 1 requirements for 5, 8, 15, 25/28, and 35 kV terminations. The insulator is made with dark gray silicone rubber, helping enable advanced tracking resistance, hydrophobic properties, and UV resistance. 3M™ Cold Shrink QT-III Termination Kit 7620-T & 7690-T Series are engineered to meet varying voltage requirements ranging from 5 to 35 kV. For comprehensive technical information about a specific product in this series, please consult a 3M expert.
Relying on science-based performance, 3M™ Cold Shrink QT-III Termination Kit 7620-T & 7690-T Series provide electrical solutions to help you meet your needs and promote efficient operations. 3M is committed to providing dependable electrical products that address everyday challenges in the field. Pioneered by 3M and implemented globally, cold shrink technology simplifies production without sacrificing performance because operations take less time and can be performed without a heating source. Known for high UV stability, pollution and chemical resistance, 3M™ Cold Shrink QT-III Termination Kit 7620-T & 7690-T Series deliver long-lasting performance and simple installation, helping you keep your operations on schedule.
Typical Properties
Productos similares
| Voltage | 5 kV, 8 kV, 15 kV | |
| Insulation Outer Diameter (metric) | 26.67 mm, 26.924 mm, 27.178 mm, 27.432 mm, 27.686 mm, 27.94 mm, 28.194 mm, 28.448 mm, 28.702 mm, 28.956 mm, 29.21 mm, 29.464 mm, 29.718 mm, 29.972 mm, 30.226 mm, 30.48 mm, 30.734 mm, 30.988 mm, 31.242 mm, 31.496 mm, 31.75 mm, 32.004 mm, 32.258 mm, 32.512 mm, 32.766 mm, 33.02 mm, 33.274 mm, 33.528 mm, 33.782 mm, 34.036 mm, 34.29 mm, 34.544 mm, 34.798 mm, 35.052 mm, 35.306 mm, 35.56 mm, 35.814 mm, 36.068 mm, 36.322 mm, 36.576 mm, 36.83 mm, 37.084 mm, 37.338 mm, 37.592 mm, 37.846 mm, 38.1 mm, 38.354 mm, 38.608 mm, 38.862 mm, 39.116 mm, 39.37 mm, 39.624 mm, 39.878 mm, 40.132 mm, 40.386 mm, 40.64 mm, 40.894 mm, 41.148 mm, 41.402 mm, 41.656 mm, 41.91 mm, 42.164 mm, 42.418 mm, 42.672 mm, 42.926 mm, 43.18 mm, 43.434 mm, 43.688 mm, 43.942 mm, 44.196 mm, 44.45 mm, 44.704 mm, 44.958 mm, 45.212 mm, 45.466 mm, 45.72 mm | |
| Number of Conductors | 1 | |
| Breakout Boot | No | |
| Insulation Rejacketing | No |
3M™ Cold Shrink QT-III Termination Kit 7625-T-110, Tape/Wire/UniShield® Shielding, 5-15 kV, 3/kit, Indoor
3M™ Cold Shrink QT-III Termination Kit 7620-T & 7690-T Series for 5-35 kV