1. Jamaica
  2. All 3M Products
  3. Personal Protective Equipment
  4. Respiratory Protection
  5. Reusable Respirators
  6. Cartridges & Filters
  7. 3M™ Particulate Filter 2078, P95, with Nuisance Level Organic Vapor/Acid Gas Relief 100 EA/Case

3M™ Particulate Filter 2078, P95, with Nuisance Level Organic Vapor/Acid Gas Relief 100 EA/Case

  • 3M ID 7000052066
Filter Class P95
Nuisance Odor Relief (< OSHA PEL) Organic Vapor & Acid Gas
Connection Type Bayonet
Aerosol Type Oil & Non-oil
Cartridge or Filter Type Particulate

NIOSH approved for environments containing certain oil and non-oil based particles

Nuisance level organic vapor/acid gas relief

Use with NIOSH approved 3M™ Half and Full Facepiece Reusable Respirator 6000, 6500, 7500, 7800S or FF-400 Series; or the 3M™ Scott™ AV-3000 SureSeal or AV-3000 HT

View more details

Details

Highlights
  • NIOSH approved for environments containing certain oil and non-oil based particles
  • Nuisance level organic vapor/acid gas relief
  • Use with NIOSH approved 3M™ Half and Full Facepiece Reusable Respirator 6000, 6500, 7500, 7800S or FF-400 Series; or the 3M™ Scott™ AV-3000 SureSeal or AV-3000 HT
  • Filters can help reduce inhalation exposures to certain airborne biological particles
  • Advanced Electret Media (AEM) is designed to provide lightweight, easy breathing comfort
  • Quarter turn twist for a quick and easy installation
  • Flame resistant
  • Use for protection in hazardous environments. For workplace/occupational use only

NIOSH approved for environments containing certain oil and non-oil based particles. 3M recommended for relief against nuisance levels of organic vapor/acid gases and for ozone protection up to 10X OSHA PEL.

Use with 3M™ Respirators 5000 Series or 3M™ Cartridge 6000 Series with 3M™ Adapter 502, or 3M™ Half and Full Facepieces 6000, 7000 and FF 400 Series with bayonet filter holders. When properly fitted, use for a variety of applications including dust, welding, metal pouring and certain finishing operations for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Also offers nuisance level relief from organic vapors and acid gases that are below the PEL. *Nuisance level refers to concentrations not exceeding OSHA PEL or other applicable government occupational exposure limits, whichever is lower. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Do not use in for respiratory protection against organic vapors or acid gases or environments that are immediately dangerous to life or health (IDLH). Not NIOSH certified for use against ozone.

Typical Properties

Resources

Related products